Actiontec MDC AC'97 Modem V2132D Driver
- Actiontec Mdc Ac'97 Modem V2132d Driver Windows 10
- Actiontec Mdc Ac'97 Modem V2132d Driver Download
- Actiontec Mdc Ac'97 Modem V2132d Driver Windows 7
- Actiontec Mdc Ac'97 Modem V2132d Drivers
- Realtek AC'97 audio: Network Card: Realtek 8139/810X (onboard) Intel Pro 2200BG wireless LAN: Modem: Actiontec MDC AC'97 v2132D Modem: PC Card: 1x Type I/II: Ports: 1x IEEE1394 (FireWire) 1x PC Card 1x LAN 1x Modem 1x Microphone 1x Headphone 1x Kensington Lock 1x S-Video (TV-Out) 1x Parallel 1x VGA 1x IR 2x USB 2.0: Touchpad: Synaptics Touchpad.
- Download AC '97 Modem Driver for free. The goal of the AC '97 Modem Driver project is to develop an open source Linux device driver to support the modem functionality of the AC '97 Codec.
Vieni e scarica driver per modem actiontec mdc ac97 v2132d modem scaricare gratuitamente. Download rapidi. Disponibile anche il download diretto tramite HTTP.
| ||||||||
| Home • Troubleshooting • PCTel Chipset | ||||||||
PCTel Chipsets Updated 14-Jul-05
May 2003: PCTel sells softmodem business to Conexant. Drivers and support for PCTel modems are no longer available from the PCTel site. (Generic drivers are now available from Conexant - see link below.) PCTel itself remains a separate company now focused on wireless-related product.
PCTel made only HSP (host signal processor - softmodem) modem chipsets - purchased by 3rd-party manufacturers that make the actual modems. A number of PC manufacturers bundle a modem with a PCTel chipset in their system package. I think it's unlikely that Conexant will continue to develop 2 lines of chipsets: while there's still quite a supply of PCTel modem product, this may become an 'orphaned' product. Conexant already made a full line of hardware and software modem chipsets, and acquired license to PCTel modem patents for Conexant products. (See Conexant Press Release.)
Because PCTel modems are all softmodems, the only difference between V.90 and V.92 modems is the driver. PCTel's V.92 driver includes 'built-in-the-driver' call-waiting/modem-on-hold - this supports incoming call-waiting only, it will not allow modem-on-hold to place an outgoing call.
As with any 56k modem, assuming you have a 56k-compatible line, the driver (or firmware) for your modem is the single most important factor in the quality of your connection. While these modems will get 56k connects, there are more interoperability problems with these modems - and you should check to see if a new driver is available for your modem.
Drivers for PCTel modems may be found from the various OEM sites, and, from Conexant.
COMPAQ - has released driver version 8.0K-C for WindowsMe only and the 'Presario PC-TEL Platinum Connect V.90' modem as SoftPaq #16792: downloadreadme. [Compaq ServicePaq's 15329, 15617 and 15697 are older WindowsMe drivers for the PCTel.] Windows-2000: Compaq ServicePaq 16794 provides v 8.0 Win2k driver; Compaq ServicePaq 16793 provides Win95/98/Me v8.0 driver. Note that Compaq softpaqs may work only if you keep the Compaq pre-loaded Windows and drivers: if you use a retail, or upgrade version of Windows, the softpaq may fail.
PCTel chipsets 288(ISA), 388(PCI) & 789 (PCI) support V.90 and K56Flex under Windows and Linux. The driver is CPU-dependent (different drivers for Intel Pentium, MMX's, and Cyrix). These are no longer made.
PCTel's 1789(PCI) chipset supports V.92 and lower protocols.
Vendors that make modems with this chipset include:
Actiontec (PCLite)
Askey (V1456VQH-P2)
Aztech (MSP 5800)
Best Data (AS56FW; 56HP92-PCT)
CIS/Wisecom (WS-5614PMEA, PMEB, HMVC)
E-Tech (PCI56PVP[+] HSP)
Harmony (HM18021-1 Data/Fax/Voice)
J-Mark (A1456VQH-P2)
Jaton (WinCruise V.90 PCI & SL HSP)
Lectron (Pragmatic I56PSP-F0, F1, F2 - Data/Fax/Voice/TAM)
Paradise (WaveCom 56k PCI HSP)
Taicom (MP56PVS-Soft)
Wellmodem (Origo FM-56PCI-PT 56K Data/Fax/Voice)
Zoltrix (8FM-56KIPCTPCI 'Phantom')
PCTel AC97 AMR Chipset - Software hosted modem for use in systems that have Audio Modem Riser (AMR) 2.1-compatible slot on motherboard. This product is discontinued and has been replaced with the PCT2303 AC-Link Chipset which supports V.92. Modems based upon these chipsets can be made for notebook computers as well as other non-PCI form factors. (AMR, Mini PCI, Daughter Card, etc.) The PCT2303 uses 2 small chips to provide a programmable interface to the telephone line, and does not use relays, transformers, or opto-isolator which makes this a very low cost modem. Vendors include:
ECS Elite Group of Taiwan - updated driver including WinXP; Ver 2.30 build 2029.41
Hightech Information Systems [HIS] - (PCTel-AMR: has no drivers for this modem - has picture & specs.)
Pine Group - (Pine/Comstar FM-3811-2 AMR V.90 (Pine drivers: For Win9x/NT/2kWinMe Driver from armonia.it.)
PC Wave - has drivers for PCTel AMR (stupid site design requires Flash for navigation and prevents placing link to other than front page.)
Additional links that may help:
PCTel Unofficial Websites
Hi-Val Modem Driver page - This company has made modems with Lucent, Rockwell, PCTel, ESS, and TI chipsets and has drivers (usually without version #) for them all.
Freeware fpr PC-Tel HSP Configurator (allows country and other configuration setup).
Most of the vendors that make modems with these chipsets also make other models using other chipsets. Some vendors don't even identify themselves on their modem!
As with any 56k modem, you may experience improvements if you Limit the Maximum Connect Speed or disable 56k. The pages on this site include the appropriate commands for PCTel modems.
Some reports indicate better PCTel connects by changing the maximum speed in Dial-Up Networking to 38,400. [Since this is a software modem, this setting shouldn't have an effect: it's designed to set the rate on a true COM port. Choosing a 38.4k maximum rate with modems using a real COM port will disable 56k.]
PCTel -> Cisco server modem: Cisco remote access has 2 available modems - Microcom and Mica. Recent Microcom firmware should support V.90 with PCTel; Cisco MICA modems didn't support V.90 with PCTel until portware 2.6.2.0 was released at the end of March. There are still problems with PCTel modems - some of which may be resolved by upgrading to PCTel firmware R765-9k which is available at E-Machines. Another workaround is to limit the PCTel modem to a 26.4k max upstream rate. [The latest beta Cisco code - 2.7.1.1 - implements a fix by recognizing the PCTel handshake and limiting the server modem receive rate to a maximum of 26.4k.]
Try init string: n0s37=0 - User report of improved throughput with this undocumented string.
Windows XP, 2000, ME & XP Support -
All controllerless modems require new Windows 'WDM' drivers to function with these Microsoft operating systems. Microsoft has a web-based Hardware Compatibility List (HCL) that can be used to determine whether a modem is [supposed to be] compatible with Windows2000, NT4, 95 and/or 98. Windows 2000 drivers should work with Windows XP - also see: Windows XP & Modemsand Windows ME & Modems. (Note: WindowsMe will support older Win9x drivers.)
Bryan in Wisconsin reports using Dell's Windows XP Driver V 2.40.022 for PCTel MDC V.92 modem with 'generic' PCTel HSP; this driver includes a Modem-on-hold applet and is located here.
LINUX SUPPORT
For the latest info on Linux support, try Sean's Linmodem Resources.
Currently, the above page has links for IntelHaM Creatix Modem, various PC-Tel drivers, and ESS ISA modems.
Dietrich Radel from New Zealand hosts 2 pages with PCTel Drivers for Linux kernels 2.4.7 - 2.4.20:
SIS 630/635/730
VIA KM266 (Might work with other VIA chipsets as well)
Dietrich notes - Most problems people have with these (and other PCTel modules) is trying to compile modules when kernel sources (or gcc version) is different to that of the running kernel. Ideally, people should compile the kernel immediately prior to compiling modules to ensure success.
PCTel is developing a Linux driver. PcTel.zip download and readme.
Linux drivers are available from: Taicom, Lectron, and Zoltrix.
AT Commands (Also see InitStrings & Limiting Your Connect Speed)
Modem Diagnostics: PCTel modems support the AT#UD and AT#UG modem diagnostic commands. However, the diagnostic information is lost when you disconnect the modem. This means that you can make test calls using Hyperterminal, and examine diagnostics while still online (using the escape to command mode +++ sequence which allows you to issue commands while the modem is still online). This cannot be done using DUNs.
Here's a Win9x registry hack from Franc Zabkar that results in the diagnostic information being written to the modemlog immediately prior to hangup:
1. Add s38=0 to DUNs Extra Settings. (This configures the modem to hangup with no delay when disconnecting.)
2. Backup your Windows registry!* Note that it is possible to make your system unusable or unstable with 'bad' edits to the registry!
Then, using regedit.exe locate the following key in the registry:
HKEY_LOCAL_MACHINESystemCurrentControlSetServicesClassModem0000Responses
Add a new response key to the right-hand pane as follows:
right-click Responses, then New, Binary Value
call it DIAG <2A4D3263
right-click DIAG and select Modify
type in the following data:
0000 97 00 00 00 00 00 00 00
0008 00 00
ALSO SEE: NOTE BELOW
3. Locate the following key in the registry:
HKEY_LOCAL_MACHINESystemCurrentControlSetServicesClassModem0000Hangup
click Hangup
right-click '1' in right-hand pane, select Modify
change value from ATH<cr> to AT#UDH<cr>
This cause the modem to produce an AT#UD report immediately prior to a hangup (H).
4. Exit regedit
The aforementioned hack will cause lines such as the following to be appended to the end of every modemlog:
<date> <time> - Recv: DIAG <2A4D3263 0=10><cr><lf>
<date> <time> - Interpreted response: MESG
After DUN initiates a software hangup (AT#UDH), it parses up to 20 lines of responses while looking for an OK. As the PCtel modems appear to condense the AT#UD report into about 10 lines, this means that the entire report is captured.
In the case of Win2K and XP, #UD info is automatically written to the modemlog with at least some of the drivers (see last note below), so a hack is not required. However, to decipher this info there are two freeware utilities:
http://www.connect.kiev.ua/files/mltr020.rar
http://www.connect.kiev.ua/files/udtr01.rar
These archives include a sample Win2000 modemlog which illustrates the format of the DIAG responses.
The above technique could be used for other reports, and for other modem types.
Max Hopper in Ireland reports being frustrated with garbled Modemlog output and too much time on his hands - and came up with discovery that adding 2 registry keys enables Unimodem.dll to correctly decode the DIAG<2A4D3263 responses:
Find the key:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUnimodemDeviceSpecific...your modem name here...Responses (your modem name here will vary depending upon mfr)
And add New Binary values:
<cr><lf>DIAG(REG_BINARY): 9e 00 00 00 00 00 00 00 00 00
DIAG (REG_BINARY) 9e 00 00 00 00 00 00 00 00 00
make sure to include a space after the G in DIAG in both instances.
*NOTE: The modemlog may also contain unrecognized responses of the form OK<cr><lf>. This is because the registry contains the response string <cr><lf>OK<cr><lf> but not OK<cr><lf>. To rectify this annoyance, add the latter response and assign the following data to it:
0000 00 00 00 00 00 00 00 00
0008 00 00
Note: The PCTel diag strings all begin with DIAG<2A4D3263xxx... There is no space after the G which results in 'unrecognized response' in the Modemlog. Therefore the registry must include the 'DIAG<2A4D3263' (no spaces) response rather than 'DIAG <2A4D3263'. Or it could include both, for compatibility with other modems, or with future driver releases.
Some data (eg Rx level) are not correctly reported after the modem has hung up. To capture this data before hang-up, add &D0 to Extra Settings. This will cause the modem to ignore a DTR drop: it will ignore a hardware hang-up request. Instead, the modem will remain on-line until it receives a software hang-up request, (AT#UDH). This command will first capture the #UD report, and then hang-up the line.
NOTE ON WIN2K/XP and ECS Drivers:
The ECS Driver inf file is not configured to support Unimodem Diagnostics (UD) in the modem log. This can be corrected by editing the .inf file (MDMCHIPV.INF) as follows:
Change:
HKR, Properties, 1, 80,01,00,00, ff,00,00,00, ff,00,00,00, 00,00,00,00, 0f,00,00,00, f7,07,00,00, 00,c2,01,00, C0,DA,00,00
HKR, Properties, 1, 80,01,00,00, ff,00,00,00, ff,00,00,00, 00,00,00,00, 0f,00,00,00, f7,0f,00,00, 00,c2,01,00, C0,DA,00,00
The above properties has 8 double words of 4 bytes each (each byte represented by a 2-character hexadecimal code separated with comma) in 'little endian' format (or 'backwards' - the least significant byte being first). Bit 11 of the 6th double word tells DUNs whether the modem supports the #UD spec. This feature appears to have been introduced with Win2K.
If the modem has already been installed, it shoud be possible to change the appropriate key in the registry.
DELL LAPTOPs w/ PCTel Modems - Trouble connecting to Cisco RAS - With PCTel 2304WT chipset, some users having trouble connecting - modem may fail to handshake, or may connect but fail to authenticate. Possible workaround - disable data compression for the modem. (You can do this in the DUNs Connectoid.)
V.92 Modem-on-Hold: Modem-on-hold is 'built-in' to the earlier V.92 PCTel drivers - there is no separate applet. Richard Kiskis in California reports BestData told him MoH working only once per session is a problem they cannot fix on their PCTel offering:
Richard writes to BestData: MoH only works once during the session. I did NOT check the box to ignore further calls during session. I recently purchased the modem and called myself from my cell phone to familiarize myself with v.92 and MoH. I allowed plenty of time between calls so that the modem was finished retraining.
BestData responds: We have seen this happen with a few systems and it is apparently an incompatibility with the OS, motherboard, and the modem. The only resolution we have for this is to exchange the modem for one with a Conexant chip based modem.
As of Feb '04, Dell supplies V.92 MDC PCTel modems with a 2.50.x driver that does not include built-in modem-on-hold: as with Conexant's other V.92 offerings, modem-on-hold is accomplished with a separate software applet. Dell includes BVRP's NetWaiting MoH software. The 2.50.0043 driver is dated 21-Nov-2002 - and the mdmchipv.inf file can be modified to install with non-Dell-supplied PCTel modems by adding the PCI ID information to the .inf file.
Version 2.50.0043 drivers from Dell: For Windows XP and Windows 2000. Dell also offers a (15mb) User Guide for the PCTel MDC modems it resells.
-
| Home | Links | Send Feedback | Privacy Policy | Report Broken Link Legal Page | Author's Web Sites | Log In |
Modemsite.com ©1998-2020 v.Richard Gamberg. All rights reserved. |
Specification
| CPU | Intel Centrino Mobile 1.5 GHz |
| BIOS | AMI BIOS. Press DEL to enter |
| Chipset | Intel 855GME |
| Memory | 256MB PC2700 DDR SODIMM (2 memory slots. Max 2GB) |
| Hard Drive | 40GB Hitachi DK23FB-40 |
| CD Drive | Slimtype Lite-On SOSW-852S DVD/RW |
| Screen | 15' TFT (native resolution 1024 x 768) |
| Video Card | Intel 855GME Extreme Graphics 2 (up to 64MB shared) |
| Sound Card | Realtek AC'97 audio |
| Modem | Actiontec MDC AC'97 v2132D |
| Network Card | Realtek 8139 / 810X (onboard) Intel Pro 2200BG wireless LAN |
| PC Card | 1x Type I/II |
| Ports | 1x IEEE1394 (FireWire) 1x PC Card Slot 1x LAN 1x Modem 1x Headphone 1x Microphone 1x Kensington Lock 1x S-Video (TV-Out) 1x Parallel 1x VGA 1x IR 2x USB 2.0 |
| Touchpad | Synaptics Touchpad |
| Power Supply | Lite-On PA-1600-06 |
| Battery | EM-520P4G (14.8v 3600mAh) |
| Dimensions | 25 x 326 x 258 (HxWxD in mm) |
| Weight | 2.7kg |
| Made By | ECS G553 |
Drivers
Your laptop should have a backup copy of all the drivers, you can find it by browsing to the c:applicationsdrivers folder.
Actiontec Mdc Ac'97 Modem V2132d Driver Windows 10
Memory Upgrades
This laptop has two memory slots, one which is accessed via the underside of the laptop (see 'Bottom of Laptop' section below) and the other which is a bit more difficult to get to. Many thanks to Martin Nash for sending in these instructions.
Actiontec Mdc Ac'97 Modem V2132d Driver Download
The second memory slot is accessed by removing the keyboard. With the laptop closed, turn the laptop on it's end so you are looking at the rear of the unit. There are two screen/lid hinges and there are little recesses in each hinge. With a small flat bladed screwdriver just 'pop' each of the recesses. Now open the laptop and place it on a flat surface. With a blunt knife or flat tool gently prize off the speaker grill, this should be loose if the rear recesses were 'popped'. With the speaker grill removed you should be able to see a single phillips screw. Undo this screw and the keyboard can be gently lifted and folded forward. Under the keyboard is a plate that the keyboard cable goes under. This plate has 2 screws. Removing this plate reveals the other memory module/slot. Re-assembly is a reverse of the above. Make sure that the keyboard cable is securely clipped onto the motherboard connector before screwing everything back as it is not held in very tightly.
Bottom of Laptop
- MiniPCI Compartment. Contains Wireless LAN card
- Memory Compartment. Contains one of the memory sockets
- Battery Release Latch
- Battery
- Hard Disk Drive
Function Keys
Fn + F1 - Turns the battery beep on/off
Fn + F2 - Turns the sound on/off
Fn + F3 - Decrease speaker volume
Fn + F4 - Increases speaker volume
Fn + F5 - Enable/disable the touchpad
Fn + F7 - Decrease display brightness
Fn + F8 - Increase display brightness
Fn + F10 - Expand display/reset to original size (option disabled during video playback)
Fn + F12 - Toggle the display between LCD, CRT, LCD+CRT, TV (option disabled during video playback or if display expanded)
In the Box
Disks Supplied
- Microsoft Works 8
Items Supplied
- Advent 7063M notebook
- LiteOn power supply. Output: 19V - 3.16A
- Mains power cable
- UK modem cable
Documentation Supplied
- Advent notebook manual
- Microsoft Windows XP Home Edition 'Start here' guide
Actiontec Mdc Ac'97 Modem V2132d Driver Windows 7
Recovery Disc
Due to the nature of the recovery process you should not use FDISK or any other partition management software to delete the partition on your Advent computer. Doing so will prevent the recovery from functioning correctly.
Using the HDD Recovery System
Your Advent computer uses the latest recovery system that doesn't require any CDs or DVDs to restore your PC to it's original factory condition.
- There are two ways to start the recovery -
- Restart your computer. Then Press F10 repeatedly until the message 'Starting System Recovery' is displayed.
- In Windows by clicking: Start / All Programs / System Recovery / System Recovery.
- The recovery will load and display a box with one option:
- Non-destructive recovery: this option will restore Windows, supplied applications, and drivers. This option will not destroy your documents or programs. These will be backed up along with the registry. These are restored at the end of the recovery process.
- System Recovery - No format: this will reinstall Windows, supplied applications and drivers. It will move your files to a folder called 'My old disk structure'. Any applications (except those supplied) will need to be reinstalled.
- System Recovery - Quick format: this option will erase your hard drive including your personal files. Windows, supplied applications and drivers will be reinstalled.
- Select the Non-destructive recovery option and press Next.
- You will be informed about System Restore in Windows, click Yes.
- The recovery will begin. Once this is complete click Restart.
Additional information
Press the ALT and D keys at the recovery menu to access a command prompt. This will allow access to C: drive.The command prompt will default to c:minintsystem32 where you can run a variety of tools including CHKDSK.EXE.
Reinstalling applications
From version 2.x of the recovery system onwards you can install applications from the c:applications folder. Drivers can be installed from the c:applicationsdrivers folder and utilities from the c:applicationstools folder. You will still need to install Microsoft Works from the supplied CD.
Using the Recovery Media
If the HDD recovery doesn't work then you can recover from the discs you should have created. To use the discs (This will completely erase all your data) -
- Start the computer with the recovery CD or DVD in the DVD drive
- If the HDD already has the recovery partition in place, then you will get a screen with two options.
- Press ‘F’ . This will delete & recreate the recovery partition, then restore the user partition. Do not choose option 'R' at this screen. If you select ‘R’ from the recovery CD start-up options, then this will first check to see if the recovery partition is present on the HDD. If the recovery partition is on the HDD, then the PC will load into the recovery options screen from the recovery partition, and not from the recovery CD/DVD set.
- If a blank HDD has been put into the machine (or there are no partitions on the HDD), then you will only get the option to press 'R'. In this case, just press 'R' , and this will create the recovery partition.
- When all data is copied to the recovery partition, then the user partition is created and formatted.
How can I make a backup of the pre-installed software?
The Recovery Media Creator will remind you to create your recovery media every time you start Windows, unless you tell it to stop reminding you, dismiss it, or create the media.
To access the Media Creator start into Windows as usual, then Click Start / All Programs / System Recovery / Recovery Media Creator.
- You will be presented with a “Welcome” screen. Click Continue.
- You will be shown some information about the creation process. Click Continue and follow the on-screen instructions.
- Click Start Creation to create your System Recovery CD Set.
- The recovery creation software will advise you how many blank CDs/DVDs you will need to create your System Recovery set. A DVD has a much higher capacity than a CD and will require less discs.
- You will then be asked to insert a blank disc into your computer. Label this CD “Recovery CD 1” and then insert it into your DVD/CD Rewriter drive.
- Once you have inserted your blank disc the process should continue – If it does not, click OK to continue.
- The creation process will continue until you are prompted for a 2nd CD. Label this CD “Recovery CD 2” and then insert it into your DVD/CD Rewriter drive.
- Once the disc creation has completed you will see a “Congratulations” screen. Click OK and the program will exit.
- You have now created a complete set of Recovery disc(s) for your computer. These discs will allow you to restore your computer in case of any problems with your Windows XP software.
- Keep these discs in a safe place.
Actiontec Mdc Ac'97 Modem V2132d Drivers
FAQ
How to Manually Run the Recovery Media Creator
If you've deleted the shortcut to Recovery Media Creator then don't panic. To run it manually open My Computer and browse to the C:WindowsCreator folder and double click on CD Creator.
Upsidedown Picture on Screen
When using the laptop the picture appears to be on its side or upsidedown. The Intel Extreme graphics driver has a rotate option which can cause this to happen. To set the screen back to normal hold down CTRL+ALT and press the Up Arrow key. To disable the feature go into Display Properties (right click on a blank part of the screen and select Properties), select the Settings tab, and click on Advanced. Select the 'Intel Graphics Media Accelerator Driver' tab and then click on the Graphics Properties button. Finally select Display Settings, take the tick out of the 'Enable Rotation' box, and then click on OK to disable the feature.
Realtek 8139 Network Card Not Connecting
Some machines fitted with a network card based on the Realtek 8139 chip will fail to send and receive data correctly. This can happen if the autodetect feature of the card is not detecting the connection properly. To get round this the connection speed of the card must be set manually
- Right-click upon the My Computer icon and select Properties.
- Select the Hardware tab and click on the Device Manager button.
- Click on the + next to Network Adapters.
- Select the entry for Realtek 8139 from the list and double click upon it.
- Select the Advanced tab.
- Select the entry for Link Speed / Duplex Mode.
- Change the Value setting from Auto to one that is appropriate for the connection (often 100 Full for a connection directly to another PC and 10 Full for a broadband connection).